Directions and Usage: 
FORTÉ™ is readily soluble in water and can be applied with conventional application equipment. For best results, apply FORTÉ™ early in the season prior to the onset of stress. Refer to the use rate table below for specific application information or consult with your sales representative for a recommendation specific to your area. Applications of FORTÉ™ alone should be avoided when conditions are hot, dry and irrigation water or rainfall are limiting (refer to “FORTÉ™ Plus” recommendations on this label). FORTE™ can be tank-mixed and applied with other products. If compatibility is uncertain, a jar test is recommended. FORTE™ can also be combined with other soil surfactant products (e.g. Brilliance®, Rely III™) for enhanced performance (refer to use directions in the use rate table on this label).

USE RATES: Turf

"FORTÉ™ Plus” Program (for greens, tees, fairways, and sports turf)
Rate: 0.37 fl. oz. / 1,000 ft2 (16 oz / acre) or 12 mL / 100 m2 (1.2 L / hectare)
Application Instructions: Mix 0.37 fl. oz. / 1,000 ft2 | 12 mL / 100 m2 (16 oz / acre | 1.2 L / hectare) of FORTÉ™ with 1 – 3 fl. oz. / 1000 ft2 (40 - 100 mL / 100 m2) of a concentrated soil surfactant (>90% active) and apply every 14 – 28 days. Use higher rates of concentrated surfactant for wider spray intervals or when peak water repellency stress is expected

Wet Conditions / Moisture Management
Rate: 0.18 - 0.28 fl. oz / 1,000 ft2 (8 - 12 fl. oz. / acre) or 5 - 10 mL / 100 m2 (0.5 - 1 L / hectare)
Application Instructions: Apply 1 week prior to heavy rainfall or before wet conditions are expected. Reapply every 7-10 days until conditions improve

*Use sufficient water for good coverage - 2 gallons / 1000 ft2 or 90 gallons / acre (850 L / hectare). Irrigate sufficiently after application to remove FORTÉ™ from leaf surfaces. When used as directed, FORTÉ™ can be left to dry on the leaf and watered-in with the evening irrigation cycle.