ReWet®
Contains non-plant food ingredients
Soil Amending Ingredients
Active Ingredients
40% Polyoxyethylene-polyoxypropylene copolymer
60% Inert Ingredients (water)
100% Total
ReWet®
Blend of surfactant polymers to treat existing water-repellency in soils
REWET® is a soil surfactant treatment chemistry formulated to easily and effectively relieve existing water related problems such as localized dry spots or wet spots. REWET® is easy to use and will not harm turf when used in accordance with product directions. When used as directed, REWET® can be applied at any time of the year when water repellency and / or localized dry spots impact the vigorous appearance of turfgrass.
Benefits
- Designed to promote rapid rehydration of hydrophobic soils
- Can be applied anytime of the year to avoid detrimental impact of water repellency stress and localized dry spots on turf and to increase the vigorous appearance of turfgrass
- Ideal for treating and rehydrating dry soils that have already become hydrophobic
-
Directions & Usage
-
Availability
REWET® is readily soluble in water and can be applied with conventional application equipment. Best results are achieved when REWET® is applied prior to the onset of drought stress, however REWET® is ideal to treat hydrophobic soils and drought stressed turf to promote recovery. Refer to the use rate table below for specific application information or consult with your sales representative for a recommendation specific to your area. REWET® can be tank-mixed and applied with other products. If compatibility is uncertain, a jar test is recommended.
USE RATES: Turf
Greens, Tees, Fairways, Lawns, Sports Turf and Other Turf: 5 - 8 fl. oz. / 1,000 ft2 (1.7 – 2.7 gallons / acre) or 160 – 260 mL / 100 m2 (16 – 26 L / hectare) - Apply every 14 – 28 days before the onset of water repellency. Use higher rate for wider spray intervals
Treatment Program (Water-repellent soils or drought-affected turf): 8 fl. oz. / 1,000 ft2 (2.7 gallons / acre) or 260 mL / 100 m2 (26 L / hectare) - Apply 8 fl. oz. per 1,000 ft2 (260 mL / 100 m2) weekly until turf conditions improve; then begin monthly treatment, or apply as needed based on local conditions
Following Topdressing Applications: 5 - 8 fl. oz. / 1,000 ft2 (1.7 – 2.7 gallons / acre) or 160 – 260 mL / 100 m2 (16 - 26 L / hectare) - Apply after sand topdressing event and water in with sufficient irrigation water. Re-apply on a weekly basis as needed based on local conditions
*Use sufficient water for good coverage (1 - 2 gallons / 1000 ft2 or 45 - 90 gallons / acre) / (4-8 L / 100 m2). Irrigate sufficiently after application to remove
Contact your Simplot Turf & Horticulture representative for availability.
Available
Not Available
