Spray-Mix®
Contains non-plant food ingredients
PRINCIPAL FUNCTIONING AGENTS
Alcohol ethoxylate phosphate ester, 2-butoxyethanol.....80%
Constituents Ineffective as Spray Adjuvant.....20%
TOTAL.....100%
All ingredients are approved for use under 40 CFR 180.
CA Reg. No. 95428-308758 WA Reg. No. 95428-24003
Spray-Mix®
Compatibility agent formulated to eliminate incompatibility problems in spray tank mixes
Spray-Mix® is a concentrated compatibility agent spray adjuvant that is formulated to eliminate incompatibility problems associated with tank mixing a wide range of crop protection products in water, suspension fertilizers, UAN or ATS solutions. Spray-Mix® can be used to either prevent or correct most incompatible tank mixes. Spray-Mix® can also demonstrate functionality as a spreader and buffering agent depending on the use rate.
Benefits
- Prevents and corrects most incompatible tank mix chemistries
- Improves the spreading of the applied spray solution
- Acidifier protects chemistries that are sensitive to high pH carrier water sources
-
Directions & Usage
-
Availability
FOR PROFESSIONAL USE ONLY. SHAKE WELL BEFORE USING. NOT FOR AQUATIC USE. FOR USE WITH PESTICIDES REGISTERED FOR AGRICULTURAL, FORESTRY, INDUSTRIAL, MUNICIPAL, NON-CROPLAND, ORNAMENTAL, RIGHTS-OF-WAY, TURF AND OTHER APPROPRIATE USES.
Spray-Mix® can be used to either prevent or correct most incompatible tank mixes. The concentration of Spray-Mix® in the spray tank cannot exceed 30% of the total amount of formulated pesticide(s).
Mixing
In the absence of specific mixing instructions found on the pesticide label, fill the spray tank with at least 50% of the desired finished carrier volume. When premixing in a mixing vessel or inductor, fill with at least 20% of the desired finished carrier volume. While the carrier is agitating, add tank mix ingredients in the following order:
1. Compatibility agent and/or antifoam, if needed
2. AMS, dry formulations (WP, DF, WDG, SP), and dry drift retardants
3. Dry soluble and suspension fertilizers / micronutrients
4. Liquid drift retardants and flowable formulations (F & FL)
5. Liquid concentrates, suspension and microencapsulated (LC, SC, ME)
6. Emulsifiable concentrates (E, EL or EC)
7. Solutions and soluble liquids (S or SL)
8. Liquid micronutrients and fertilizers
9. Water conditioners and other adjuvants (COC, HSOC, MSO, NIS)
10. Finish filling to desired spray volume level and continue agitation
USE RATES
Use 1 to 4 pints of Spray-Mix® per 100 gallons of spray solution to prevent antagonistic tank mixing conditions. Use 3 to 6 pints of Spray-Mix® per 100 gallons of spray solution to correct tank mix incompatibilities.
Contact your Simplot Turf & Horticulture representative for availability.
Available
Not Available